Features:  
      7 inch high resolution (800x600) colorful TFT LCD
           Simultaneous display of 4 channel waveform on one screen
           Dual NIBP with over pressure protection
           Analysis of real time ST segment and arrhythmia
           Standard configuration: ECG, NIBP, RESP, SPO2, 1-TEMP, PR, drug dose calculation, OXYCRG
           Optional configuration: Built in thermal printer, 2-TEMP
           Standard RJ-45 socket to support networking capacity of maximum 66 beds and compatibility with HIS
           Digital SPO2 enables effective examination in case of active patient and low infusion as well
                interference caused by electrosurgical unit
           Compact and portable design allows uninterrupted operation with its built in rechargeable battery
Specifications:

 ECG    

Input:3lead ECG cable, standard AAML cable connector
Lead selection: I, II, III
Gain selection: ×1, ×2, ×4, ×8
Sweep speed: 12.5mm/s, 25mm/s,50mm/s
Bandwidth: 0.5Hz~40Hz, (for monitoringor operation)
0.05Hz~100Hz (for diagnosis)
Calibration signal: 1m V
Protection against interference arisen from electrosurgical uni, pace maker and/or defibrillator    

 SPO2    

Range: 5%~100%
Accuracy:±2%(70%~100%), ±3% (40%~69%)

Pulse Rate
Range: 0bpm~250bpm
Accuracy: ±1bpm    

NIBP    

Measurement method: Oscillometric
Measurement mode: Manual, Auto, STAT
Measurement interval in AUTO mode: 1,.3,5,10,15,20,30,60 (min)
Measurement type: SYS, DIA, MEAN
Resolution: 1mmHg
Over pressure protection: Available    

 Temperature    

Measuring range: OºC~50ºC
Resolution:0.1ºC
Accuracy: ±0.1ºC    

Heart Rate    

Measure range: 20bpm~250bpm
Accuracy: ±1bpm
Resolution: 1bpm
Alarm mode: Audible and visible alarm    

Operation Environment    

Temperature: OºC~45ºC
Humidity:30ºC~85ºC(non-condensed)    

Power Condition    

DC: Built in chargeable NI/MH batter
AC power: 100V~24V,50Hz~60Hz,10VA    

 Dimension    

150mm×114mm×45mm    

 Net weight    

600g