LCD Multi-Parameter Patient Monitor (PM-300A)

Model NO.:PM-300A
Type:Pulse Oximeter
Group:All People
Gross Weight:4.5kg
Power Voltage:AC 100 V-240V 50-60Hz
Temperature Operation:0 ~ 40 °c
Safety Level:Class , Type CF
Specification:CE, ISO
HS Code:90181930
Classification:Imaging Diagnostic Equipment
Certification:CE
Net Weight:3.5kg
Package Size:258*210*175mm
Power Iutput:≤70va
Fuse:1.6A
Trademark:everich
Origin:China

Product Description

Features:
    7 inch high resolution (800x600) colorful TFT LCD
           Simultaneous display of 4 channel waveform on one screen
           Dual NIBP with over pressure protection
           Analysis of real time ST segment and arrhythmia
           Standard configuration: ECG, NIBP, RESP, SPO2, 1-TEMP, PR, drug dose calculation, OXYCRG
           Optional configuration: Built in thermal printer, 2-TEMP
           Standard RJ-45 socket to support networking capacity of maximum 66 beds and compatibility with HIS
           Digital SPO2 enables effective examination in case of active patient and low infusion as well
                interference caused by electrosurgical unit
           Compact and portable design allows uninterrupted operation with its built in rechargeable battery
Specifications:

Size and Weight

Name of the monitor	Multi-parameter Monitor
Size	258mm×210mm×175mm
Weight	4.5Kg

System output

Display type	12.1″LCD color display screen, with a resolution of 800×600
Interface with central unit	Network port

Power supply

Power Voltage	AC 100V~240V 50/60Hz
Power Input	≤70VA
Fuse	1.6A
Safety Level	Class I , Type CF

Battery

Type	Rechargeable Lead acid cell, 12V/3.2AH
Charge time	≤6 hours
Working hours when charged fully	≥30min when using normally

Environment

Ambient Temperature	Working 0~+40ºC Transportation and storage -20~+50ºC
Relative humidity	Working ≤85% Transportation and storage ≤93%
Atmospheric pressure	Working 860~1060 hPa Transportation and storage 500~1060 hPa

ECG

Lead Mode	5-leads ECG input 3-leads ECG input
Lead selection	I, II, III, aVR, aVL, aVF, V- I, II, III I, II, III, aVR, aVL, aVF, V1~V6
Gain	2.5mm/mV, 5mm/mV, 10mm/mV, 20mm/mV, 40mm/mV
Input impedance	≥5.0 Mohm(d.c. ~ 60 Hz)
CMRR	DIAG ≥85dB MON ≥105dB OPS ≥105dB
Frequency response	DIAG 0.05~75Hz MON 0.5~25Hz OPS 1~15Hz
Electrode offset potential	±300 mV d.c. → ±600mV d.c.
Leakage Current	<10 uA
ECG signal range	±6.0 mV
Baseline recovery	<5 s After Defi. (MON or OPS mode)
Insulation	Breakdown Voltage 4000VAC 50Hz/60Hz
Indication of electrode separation	Available
Sweep speed	12.5mm/s, 25mm/s, 50mm/s

HR Measuring and Alarm

Range	10~300 bpm
Refreshing time	Per pulse
Resolution	1 bpm
Accuracy	±1% or ±1 bpm, whichever is greater
Alarm range	10~300 bpm, continuously adjustable between high limit and low limit
Alarm indication	Sound and light alarming

NIBP

Way of measurement	Automatic oscillometry
Range of measurement	Adult		SYS	30~275 mmHg
			DIA	10~255 mmHg
			MEAN	20~255 mmHg
	Child		SYS	30~235 mmHg
			DIA	10~160 mmHg
			MEAN	20~170 mmHg
	Neonate		SYS	30~145 mmHg
			DIA	10~120 mmHg
			MEAN	20~140 mmHg
Cuff pressure range	0~280 mmHg
Resolution	1 mmHg
Pressure Accuracy Static Clinical	±2% or ±3 mmHg, whichever is greater ±5 mmHg average error 8 mmHg standard deviation
Unit	mmHg, kPa
Pulse rate measuring range	40 ~ 240 bpm
Inflation time for cuff	Less than 40 sec. (standard adult cuff)
Total cycle time	20 to 45 seconds typical (dependent on heart rate and motion artifact)
Intervals for cycle measurement time	1,2,3,4,5,10,15,20,30,45,60,90 minutes 2,4,8 hours
Overpressure Protection Adult Child Neonatal	Hardware and software double protections 315±10 mmHg 255±10 mmHg 170±10 mmHg
Range of alarm	SYS	0~300 mmHg, continuously adjustable between high limit and low limit
	DIA	0~300 mmHg, continuously adjustable between high limit and low limit
	MEAN	0~300 mmHg, continuously adjustable between high limit and low limit
Alarm indication	Sound and light alarming
Ways of measurement	Single, Cycle and Quick (Q.sys)

SpO2

Range of measurement	0~100%
Resolution	1%
Precision	At 70~100%, ± 2% At 35~69%, ± 3% At 0~34%, unspecified
Range of alarm	0~100%, continuously adjustable between high limit and low limit
Alarm indication	Sound and light alarming
Type of sensor	Dual bandwidth light emitting diode
PR: Measuring and alarm Range Resolution Accuracy	25~250 bpm 1 bpm ±2% or ±1 bpm, whichever is greater

TEMP

Range of measurement	0.0~50.0ºC
Resolution of display	0.1ºC
Unit	Celsius (ºC), Fahrenheit (ºF)
Precision	±0.1ºC
Connecting cable	Compatible with YSI-4400
Range of alarm	0.0~50.0ºC, continuously adjustable between high limit and low limit
Alarm indication	Sound and light alarming

RESP

Method	Impedance between RA-LL (R-F)
Measuring impedance range	0.5 ~3 Ohms
Base line impedance range	500~4000 Ohms (50~120 kHz exciting frequency)
Range of measurement	0~120 bpm
Precision	±2 bpm
Gain	x1,x2,x4
Range of alarm	0~120 bpm, continuously adjustable between high limit and low limit
Sweep speed	6.25mm/s, 12.5mm/s, 25mm/s
Asphyxia	1~60s, off
Alarm indication	Sound and light indication

Recorder

Speed of paper feeding	12.5mm/s, 25mm/s, 50 mm/s (Only valid whit B Type recorder)
Recording medium	50mm thermal paper
Recording track	Single track or tri-track

Previous: Vital Signs Patient Monitor (MD2000B) Next: LCD Multi-Parameter Patient Monitor (PM-200A)

Products

Product Category

Contact Person

LCD Multi-Parameter Patient Monitor (PM-300A)

Product Description

PRODUCTS

QUICK LINK

CONTACT US