Transport Incubator in Hospital (Model: TI-2000)
You are here: Home » Products » Emergency Treatment Products » Infant Radiant Warmer, Incubator and Neonate Bilirubin » Transport Incubator in Hospital (Model: TI-2000)
Share to:

Transport Incubator in Hospital (Model: TI-2000)

Quantity:
  • TI-2000
  • Nursing Training Baby
  • Without
  • 400va
  • Internal Battery
  • Skin Temperature Sensor
  • 1090mm X 655mm X 755mm
  • 138cm X 61cm X 40cm
  • everich
  • Jiangsu
  • Transport Incubator
  • Nursing Training Baby
  • Baby
  • <=52 Db(a)
  • Oxygen Cylinders
  • Mattress
  • 109cm X 65.5cm X 76cm
  • 80kg
  • CE, ISO, SGS
  • 90189090
Brief introduction:
This unit is used for transporting the newborn babies between sickrooms or hospitals; AC Power and DC Power can be used alternatively and the device can be connected with Power 12V or 24V. Air-temp or skin-temp servo-controlled by micro-computer; Double walls hood could prevent heat losing from hood and prevent the influence to the incubator from exterior heat resource; Quite operation windows can reduce the disturbance to the baby during nursing with oxygen cylinder and oxygen supply system; ; Touch switch panel with LED digital display, set-temp, skin-temp, real-temp, storage battery voltage are displayed separately; Indicated electricity-offer mode; Night light, luminescence design; Seven self-checking alarms with audible and visible; Heating power rate indicates 0-100%; Shockproof and adjustable stand with cylinder and three steps height.
Brief introduction:
 Two temperature control modes: Air mode and Baby mode controlled by micro-computer;  Use AC Power and DC Power alternatively, DC 12V or DC 24V Power on the ambulance;
 Set temperature, air temperature, baby temperature and internal battery voltage can be displayed separately;
  Failure alarm indication;
 Can be equipped with >37ºC temperature set function;
 Double wall Acrylic glass hood with side door so that the bassinet can be pulled out from it;
  Natural air flow humidity;
  The height of whole unit can be adjusted;
  Oxygen supply system;
 Observation lamp
  Disposable skin temperature sensor is optional;
  Ambulance trolley is optional
Standard configuration:
Main body (including the hood, controller, bassinet, internal battery, and observation lamp), oxygen cylinders, oxygen supply system, skin temperature sensor, I.V. Pole, mattress, adjustable stand)
Optional configuration: >37ºC override temperature mode
Specification
AC Power supply AC220V-230V/50Hz or AC110-120V/50-60Hz
DC Power supply DC12V/10A or DC24V/6A
Input power 400VA
Mode of control Air mode and baby mode controlled by micro-computer
Air temperature control range 25ºC-37ºC(Override mode 37-38ºC)
Baby temperature control range 34ºC-37ºC(Override mode 37-37.5ºC)
Skin temperature sensor accurac ±0.3ºC
Temperature variability  ≤1.0ºC
Temperature uniformity ≤1.5ºC(mattress is on the horizontal position)
 Noise inside hood ≤52 dB(A)
Operating range 10 ºC~30ºC
Ambient air movement rate <1.0m/s

AC Power supply: AC220V-230V/50Hz or AC110-120V/50-60Hz
 DC Power supply: DC12V/10A or DC24V/6A
 Input power: 400VA 
Mode of control: Air mode and baby mode controlled by micro-computer 
Air temperature control range: 25ºC-37ºC(Override mode 37-38ºC)
Baby temperature control range: 34ºC-37ºC(Override mode 37-37.5ºC)
Skin temperature sensor accuracy: ±0.3ºC
Temperature variability: ≤1.0ºC
Temperature uniformity: ≤1.5ºC(mattress is on the horizontal position)
 Noise inside hood: ≤52 dB(A)
 Failure alarm: over-temperature alarm, temperature deviation alarm, sensor alarm, Motor Fan Failed Alarm, Power failure Alarm and so on.
  Operating at temperature equilibrium:90min(Set Temp 36ºC-Ambient 15ºC)
Environmental temperature
Operating range: 10 ºC~30ºC
(Set temperature should be higher 3ºC than the environment temperature)
Ambient air movement rate: <1.0m/s
 
Packing
Package: each unit is packed into two cartons
Dimension (Main body): 109cm x 65.5cm x 76cm
       (Cabinet): 138cm x 61cm x 40cm
Gross Weight (Main body): 80Kg
              (Cabinet): 53Kg

PRODUCTS

QUICK LINK

CONTACT US

Tel: 0086-25-84639698,84612226
Fax: 0086-25-84613336
Zip: 210007
Address: Room 603 bld No.8 Jinlin Shanfu 118 Daguang Road Nanjing China